Shenzhen Sunbow Insulation Materials MFG. CO., LTD
Shenzhen Sunbow Insulation Materials MFG. CO., LTD ----- A focused insulating sleeving factory and exporter
Add to Cart
Insulation type Silicone Fiberglass Sleeving / Flame Retardant industrial sleeves
Production:
Silicone rubber fiberglass sleeve is woven with non-alkali fiberglass yarn, and then coated with silicon resin under the high temperature.
Specification:
1) Rated voltage: 1.5, 2.5, 4, 7kv
2) Diameter: 0.5mm-30mm
3) Color: red, black, white and green etc.Other color are also available according to request.
4) Types: 200m/roll or 100m/roll
Property and application:
1) surface is smooth and soft
2) superior elasticity, cold endurance and antiaging properties
3) Widely used for the insulating protection of motor and electrical equipments with higher request.
High heat resistance Insulation type silicone rubber fiberglass sleeving
Available Sizes in continuous Roll lengths or cut lengths in 1000mm per piece
0.5mm ~ 2.0mm, 200 meters/roll;
3.0mm ~ 10.0mm, 100 meters/roll;
12.0mm ~ 18.0mm, 50 meters/roll;
20.0mm ~ 30.0mm, 25 meters/roll.
Carton Size 35*35*60cm
Colors: Black, yellow, white and natural, Other colours are available on request
Specification
| Item | Performance | Note | |
| Dielectric Breakdown Voltage KV AC | Minimum Average | ≥7.0 | Before Aging |
| Minimum Single Point | ≥5.0 | ||
| Minimum Average | ≥3.5 | 6 Hrs* 245±5ºC 245±5ºC 6Hrs Aging | |
| Minimum Single Point | ≥2.5 | ||
| No Breakdown | / | 1 KV in 2% Salt Water | |
| Thermal Endurance | No Indication of Crack | OK | 1440 Hrs* 235±5ºC 235±5ºC 1440Hrs Aging |
| Fire Resistance | VW-1 | OK | UL 1441 |
Dimension
| Inside Diameter | Wall Thickness (mm) | Standard Package (m/roll) | |
| Nominal (mm) | Tolerance (mm) | ||
| φ0.5 | +0.2, -0.1 | ≥0.37 | 200 |
| φ1.0 | +0.2, -0.1 | ≥0.37 | 200 |
| φ1.5 | +0.2, -0.1 | ≥0.37 | 200 |
| φ2.0 | +0.2, -0.1 | ≥0.37 | 200 |
| φ2.5 | +0.3, -0.1 | ≥0.42 | 200 |
| φ3.0 | +0.3, -0.1 | ≥0.42 | 200 |
| φ4.0 | +0.3, -0.1 | ≥0.42 | 200 |
| φ4.5 | +0.3, -0.1 | ≥0.51 | 100 |
| φ5.0 | +0.3, -0.1 | ≥0.51 | 100 |
| φ6.0 | +0.3, -0.1 | ≥0.51 | 100 |
| φ7.0 | +0.3, -0.1 | ≥0.56 | 100 |
| φ8.0 | +0.3, -0.1 | ≥0.56 | 100 |
| φ9.0 | +0.3, -0.1 | ≥0.66 | 100 |
| φ10.0 | +0.3, -0.1 | ≥0.66 | 100 |
| φ12.0 | +1.0, -1.0 | ≥0.66 | 50 |
| φ14.0 | +1.0, -1.0 | ≥0.66 | 50 |
| φ16.0 | +1.0, -1.0 | ≥0.66 | 50 |
| φ18.0 | +1.0, -1.0 | ≥0.66 | 50 |
| φ20.0 | +1.0, -1.0 | ≥0.76 | 25 |
| φ25.0 | +1.0, -1.0 | ≥0.76 | 25 |
| φ30.0 | +1.0, -1.0 | ≥0.76 | 25 |
High heat resistance Insulation type silicone rubber fiberglass sleeving
